WATER SENSOR
Rs. 20.40
Skip to product information
WATER SENSOR
Rs. 20.40
Water Presence Sensor with parallel exposed conducting traces. Grounded traces are interlaced with signal traces held high by a 1MΩ pull-up resistor. When water bridges a sensor trace to a ground trace, output voltage drops — detectable on Arduino digital or analog pins. Analog output 0–4.2V proportional to water contact area. Low power (<20mA).
Pin Definition:
- S — Signal (analog output)
- + — 5V supply
- − — GND
Specifications:
- Working Voltage: 5V
- Working Current: <20mA
- Output: Analog (0–4.2V)
- Detection Area: 40 × 16mm
- PCB Dimensions: 65 × 20 × 8mm
- Working Temperature: 10–30°C
- Weight: 3g
- Compatible: Arduino UNO, Mega 2560, ADK
Applications:
- Rainfall detection
- Liquid leakage detection
- Tank overflow alarm
- Arduino water presence sensing projects
