MOTOR ENCODER( OE-775 HALL EFFECT TWO CHANNEL MAGNETIC ENCODER)
Rs. 455.60
Skip to product information
MOTOR ENCODER( OE-775 HALL EFFECT TWO CHANNEL MAGNETIC ENCODER)
Rs. 455.60
The OE-775 is a two-channel Hall effect quadrature encoder for motor shaft feedback. Mounts on the rear protrusion of a compatible DC motor shaft using an included magnet, plastic case, washer, and screws. Outputs A and B are square waves ~90° out of phase; counting both edges of both channels gives 7 counts per motor shaft revolution. Output frequency indicates speed; channel order indicates direction.
Pin Configuration (6-pin connector):
- Pin 1 — Hall Sensor VCC (4.5–24V)
- Pin 2 — Hall Sensor GND
- Pin 3 — Channel A output
- Pin 4 — Channel B output
- Pin 5 — Motor −
- Pin 6 — Motor +
Specifications:
- Model: OE-775
- Type: Two-channel Hall effect quadrature encoder
- Resolution: 7 counts/revolution (both edges, both channels)
- Supply Voltage: 4.5–24V
- Supply Current: 14mA max
- Output Current: <0.1mA
- Leakage Current: 10µA
- Operating Temperature: -40 to +85°C
- Humidity: 20–85% RH
- Diameter: 41.85mm
Applications:
- DC motor speed and position feedback
- Robot drive wheel odometry
- Closed-loop motor control systems
